0 item(s)
View cart
You have no items in your shopping cart.
$120.00
Sku: BF-P3001
Availability:
AVAILABLE
In stock & estimated to ship in 3-7 days by October 13, 2026
Description
Biofargo Cell-Free Protein Synthesis Kit produces protein in vitro from an E. coli lysate. Transcription and translation are coupled in one tube: the lysate supplies the RNA polymerase, ribosomes, translation factors and tRNAs, and the kit supplies the amino acids, NTPs and energy source. A DNA or RNA template goes in and protein comes out, with no transformation, culture or induction step.
Expression starts within 1–2 hours and peak yield is reached in 8–24 hours, so a construct can be tested the same day it is built. Reported yields reach more than 3 mg/mL. Because nothing has to stay alive, the reaction tolerates work that kills cells — toxic proteins, unnatural amino acids, labelled precursors and direct addition of cofactors.
The kit is supplied lyophilised, which keeps it stable at −20 °C for 12 months and lets it ship on blue ice rather than dry ice. Reactions run in tubes or 96-well plates and scale linearly from microlitres upward. A pJL1-sfGFP control plasmid is included, so a failed run can be told apart from a failed construct by eye. For disulfide-rich proteins such as full-length antibodies, nanobodies and many membrane proteins, use the Max version of this kit, which is optimised for disulfide-bond formation.
For Research Use Only. Not for use in diagnostic or therapeutic procedures, or in food or pharmaceuticals.
Specifications
| Parameter | Specification |
| Product Name | Biofargo Cell-Free Protein Synthesis Kit (Lyophilized) |
| Catalog Number | BF-P3001 |
| Expression System | E. coli lysate, coupled transcription–translation |
| Pack Size | 20 reactions (50 µL reaction scale) |
| Format | Lyophilized |
| Reported Yield | Up to >3 mg/mL |
| Time to Protein | Expression within 1–2 h; peak yield at 8–24 h |
| Template | Plasmid DNA, linear DNA, PCR product, RCA product or mRNA |
| Template Requirement | T7 promoter, ribosome binding site and T7 terminator; final concentration 5–10 µg/mL |
| Disulfide-Bond Folding | Not optimised — use the Max version for disulfide-rich proteins |
| Reaction Temperature | 25–30 °C with vigorous shaking |
| Reaction Volume | Typically 50–100 µL; scales linearly; tubes or 96-well plates |
| Positive Control | pJL1-sfGFP control plasmid, 2 µg (Ex/Em 485 / 528 nm) |
| Storage | −20 °C, valid 12 months. After reconstitution: −20 °C up to 1 month, −80 °C up to 12 months |
| Shipping | Blue ice |
| Intended Use | For research use only |
Features
Protein the same day — expression starts in 1–2 hours and peaks at 8–24 hours, against days for transformation, culture and induction.
Yields up to >3 mg/mL, several times what a standard cell-free lysate delivers.
Open reaction — nothing has to survive, so toxic proteins, unnatural amino acids, isotope labels and cofactors can be added directly.
Any common template — plasmid, linear DNA, PCR product, RCA product or mRNA, with no cloning host required.
Lyophilized format — 12 months at −20 °C and shipping on blue ice rather than dry ice.
Scales and parallelises — reactions run linearly from microlitres up, in tubes or 96-well plates.
sfGFP positive control included, so a failed reaction is distinguishable from a failed construct by eye.
Applications
Construct screening: Test many designs in parallel in 96-well plates before committing to a cell-based expression run.
Toxic and difficult proteins: Express proteins that kill or are not tolerated by a living host.
Protein engineering: Pair with Golden Gate or Gibson assembly and PCR or RCA templates for rapid design–build–test cycles.
Labelled protein: Add unnatural amino acids or isotope labels directly to the reaction for structural and mechanistic work.
Enzyme and assay reagents: Produce small amounts of active enzyme for assay development without a fermentation step.
Kit Components
| Component | Volume | Storage |
| Cell-free system solution A (Lyophilized) | 1 vial (300 µL after reconstitution) | −20 °C |
| Cell-free system solution B (Lyophilized) | 1 vial (600 µL after reconstitution) | −20 °C |
| CFPS-Control Plasmid (pJL1-sfGFP) | 2 µg | −20 °C |
Storage & Shipping
Ship on blue ice.
Store the lyophilized kit at −20 °C. Valid for 12 months.
After reconstitution, store at −20 °C for no more than 1 month, or at −80 °C for no more than 12 months.
Keep reagents on ice while assembling reactions and avoid repeated freeze-thaw cycles.
Protocol Overview
Reconstitute solution A with 300 µL and solution B with 500 µL of nuclease-free water, and mix thoroughly.
Prepare the template. Plasmids should be column-purified; PCR products need roughly 200 bp of flanking sequence upstream of the T7 promoter and downstream of the T7 terminator to protect the linear fragment from exonucleases. Quantify the template accurately before use.
Assemble the reaction on ice in a nuclease-free tube. For a 50 µL reaction: 15 µL solution A (30%), 30 µL solution B (60%), template to a final 5–10 µg/mL, and nuclease-free water to 50 µL.
Incubate at 25–30 °C with vigorous shaking. Maximum yield is normally reached by about 8 hours; an overnight 16-hour reaction also works. Lowering the temperature to 25 °C helps some proteins fold, and the reaction time should then be extended.
For reactions above 100 µL, use a vessel with enough headspace or aeration — a shake flask at 200 rpm — since oxygen transfer limits yield at larger scale.
Take 1 µL of total reaction for total protein, or of the supernatant for soluble protein, and run SDS-PAGE.
Run the supplied pJL1-sfGFP plasmid alongside as a positive control. A successful reaction shows visible green fluorescence, and can be quantified on a plate reader at Ex/Em 485 / 528 nm.
Frequently Asked Questions (FAQs)
Common questions about Biofargo Cell-Free Protein Synthesis Kit (Lyophilized).
How long does a reaction take?
Expression begins within 1–2 hours. Maximum yield is normally reached by about 8 hours at 25–30 °C, and an overnight 16-hour reaction also works. Running at 25 °C helps some proteins fold but needs a longer incubation.
What yield should I expect?
The kit is specified at up to more than 3 mg/mL. Actual yield varies a great deal with the target protein, so treat the figure as the system's capability rather than a guarantee for a given construct. Run the supplied sfGFP control to confirm the system is performing before judging a difficult target.
What templates can I use?
Plasmid DNA, linear DNA, PCR products, RCA products from phi29 amplification, or mRNA. The template needs a T7 promoter, a ribosome binding site and a T7 terminator, at a final concentration of 5–10 µg/mL.
Which vectors work, and which do not?
The included pJL1-sfGFP can be used as a cloning vector, and pET-series plasmids that carry the T7 promoter without the lactose operon — such as pET-9a and pET-23a — are compatible. Plasmids containing the lac operon, pET28a among them, significantly reduce yield and are not recommended.
How should I prepare a PCR-product template?
Design the forward primer about 200 bp upstream of the T7 promoter and the reverse primer about 200 bp downstream of the T7 terminator. Those flanks protect the linear fragment from endogenous exonucleases, and the product can then be used without purification.
Does plasmid purity matter?
Yes, more than for most applications. Use a high-purity plasmid prep with a separate deproteinization wash buffer and no RNase A carryover, and elute in nuclease-free water. Plasmid that has not been column-purified cannot be used directly in the reaction.
Can it make disulfide-bonded proteins?
Not this version — it is not suited to disulfide-rich proteins. Use the Biofargo Cell-Free Protein Synthesis Kit Max, which has the redox conditions optimised in the formulation.
How do I scale the reaction up?
Reactions scale linearly. A typical run is 100 µL in a 2 mL microcentrifuge tube. Above that, oxygen transfer starts to limit yield, so use a vessel with sufficient headspace or aeration — a shake flask at 200 rpm.
How do I know the reaction worked?
Run the supplied pJL1-sfGFP control plasmid. A successful reaction fluoresces green and can be quantified on a plate reader at Ex/Em 485 / 528 nm. For the target protein, run 1 µL of total reaction or supernatant on SDS-PAGE.
How is it stored and shipped?
It ships on blue ice and is stored lyophilized at −20 °C, where it is valid for 12 months. Once reconstituted, keep it at −20 °C for up to 1 month or at −80 °C for up to 12 months.
Can it be used for clinical or diagnostic purposes?
No. This product is for research use only and is not intended for human, diagnostic or therapeutic use.
Related Products
Biofargo Cell-Free Protein Synthesis Kit Max — optimised for disulfide-bond formation; use it for antibodies, nanobodies, cytokines and membrane proteins.
Documents
When can I expect my order to ship?
Most orders are filled and shipped within 2-3 business days from the time they are received.
Our standard shipping usually take 2-5 days.
We also provide express shippping for time-sensitive deliveries.
Email contact@biofargo.com if you have any requirements.
