Magnetic Separator For Cell Isolation

Description

Easily and efficiently perform magnetic cell separation procedures using compatible cell isolation reagents. The magnet generates a high-gradient magnetic field within the interior cavity, enabling the separation of cells labeled with magnetic particles without the need for columns. It is designed to hold a standard 12 × 75 mm (5 mL) polystyrene tube.

To select the appropriate magnet for your application, compare the available cell separation magnet options based on your research needs.

Learn more about how immunomagnetic cell separation technology works.

Species

Human, Mouse, Non-Human Primate, Other, Rat

Directions for Use

This magnet is intended for use only with compatible cell separation kits. For more information, refer to the appropriate product information sheet or contact technical support.

NOTE: The size of the O-ring is designed for polystyrene tubes, as cell recovery is typically better with polystyrene than with polypropylene tubes. However, some users may prefer polypropylene tubes because monocytes may adhere to polystyrene. If polypropylene tubes are used, it is recommended to reduce the diameter of the opening by inserting a small piece of rubber between the O-ring and the housing.

CARE OF MAGNET: After completing a cell separation procedure, wipe the magnet clean with distilled water and then with alcohol to dry it. To disinfect the magnet, wipe it with 10% diluted household bleach and then wipe it again with a water-dampened cloth to help avoid corrosion of metal parts. Do not submerge the magnet in liquid.

Applications

This product is designed for use in the following research area(s) as part of the highlighted workflow stage(s). Explore these workflows to learn more about the other products we offer to support each research area.

Precautions

• This product generates a strong magnetic field. Keep it away from electronic devices, watches, pacemakers, magnets, and other objects susceptible to magnetic interference.

• To avoid injury or damage, keep metal objects—especially sharp items such as knives—away from the magnetic separator.

• Users with implanted electronic medical devices (such as pacemakers) should maintain a minimum safety distance of 50 cm from the product.

• Do not disassemble the magnetic separator.

• This product is intended for scientific research use only.

Storage

• Store at 15 - 25°C

• After use, please put this product back into the box and keep it in a dry and cool place. Do not adsorb the product on iron plates or other metal surfaces, and avoid magnetic adsorption between products to prevent damage.

• Avoid prolonged sunlight or ultraviolet radiation to prevent damage to the product.